# General

**Services**

Running services can be managed under the general tab If they are running as docker instances. You can start/stop/restart a particular service on the ‘Running Services’ section.

<figure><img src="/files/vK3HkwGZJUOrczmBd0CX" alt=""><figcaption></figcaption></figure>

**Network Scanning For Cameras**

Feniks can scan the whole network to find RTSP broadcasting cameras. This operation can take 10-45 minutes to complete depending on your network. You can find this feature under the General Tab.

<figure><img src="/files/YPdYROBlR5PCWZYW5Cle" alt=""><figcaption></figcaption></figure>

After scanning the network, you can use address recommendations when you add a new camera as shown below.

<figure><img src="/files/om2Agxy7CrXx3l0XtrBH" alt=""><figcaption></figcaption></figure>


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://feniks.gitbook.io/doc/feniks/general.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.